CASE 162112A1 9030 Turntable bearings

Retainer Material:Nylon; Grease Type:Unirex N2; Flinger Type:None; Self Aligning:Self Centering; Bearing Inner Ring Material:Steel; Retainer Type:Std Retainer; Bearing Locking Device:Setscrew; Bearing Bore Shape:Round; Bearing Series:203 Series; Expansion Type:Non-Expansion;

A:21 mm; SW:3.18 mm; L1:225 mm; Weight:1.61 kg; H2:41 mm; Recommended tightening torque for set screw:3.7 Nm; C0:7.88 kN; Designation of housing:SP203-205/52-; A5:19.7 mm; G:R1/8";

C:12.8 kN; H1:11 mm; C0:6.65 kN; S:12.7 mm; Designation of bearing:UC204-12G2L3; A1:22 mm; N:M10; E:13 mm; Weight:0.57 kg; s1:15.5 mm;

A3:1.5 mm; s1:30.5 mm; B:34 mm; S:17 mm; C:12.8 kN; Weight:0.59 kg; d1:32.4 mm; A:20 mm; d:12 mm; Designation of bearing:EX201G2T04;

G:R1/8"; A:36 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; s1:17 mm; Dz:60 mm; N:M10; H:36.5 mm; H2:70 mm; L1:21 mm;

S:17.5 mm; C:25.7 kN; J:68 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; Designation of housing:PG207-; H:47.6 mm; H2:93 mm; N:M12; B:42.9 mm;

Fatigue limit load, Cu:5.7 kN; D:56.9 mm; Y0:1.07; Max operating temperature, Tmax:120 °C; r1a max:1.3 mm; B:19.84 mm; Min operating temperature, Tmin:-40 °C; Rating life coefficient, A2:1.9; Brand:NTN; Mass:0.24 kg;

Mass:2.07 kg; Characteristic cage frequency, FTF:0.44 Hz; Snap ring reference:R180; Ca max:6.81 mm; Fatigue limit load, Cu:2.95 kN; Characteristic inner ring frequency, BPFI:8.41 Hz; b max:3.8 mm; b min:3.5 mm; Min operating temperature, Tmin:-20 °C; D4 max:192.9 mm;

B1:77.7 mm; T max.:100 °C; d:57.15 mm; T min.:-40 °C; C0:32.8 kN; e:1 mm; C:52.5 kN; L:195 mm; Recommended tightening torque for set screw:16.8 Nm; s1:53.2 mm;

d1:82 mm; L:175 mm; J:143 mm; s1:53.2 mm; A1:16 mm; T min.:-20 °C; G:R1/8"; B1:77.7 mm; S:30.9 mm; B:61.8 mm;

Da:46.8 mm; Radius:0.6 mm; d:30 mm; B:10 mm; da:35 mm; Dynamic Load Rating:8.2 kN; Oil Holes:1.5 mm; Static Load Rating:9.2 kN; D:55 mm;

Ball Bearing Housing Series:210 Series; Ball Material:Steel; Max Bearing Speed:3600 rpm; Seal Type:Triple Lip; Bearing Insert Material:Steel; Anti-Rotation Pin:Yes; Bearing Series:210 Series; End Cap Groove:Yes; Retainer Type:Max Life Cage; Retainer Material:Polymer;

N:41mm; L2:21 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; Designation of housing:T213-; L3:121 mm; SW:4.76 mm; N2:70 mm; H2:111 mm; A1:26 mm;

SW:3.97 mm; C:29.6 kN; N:29mm; L2:16 mm; L1:88 mm; B:49.2 mm; A5:30.2 mm; L:144 mm; L3:83 mm; P:300 mm;

Width:1.693 Inch | 43 Mill; Weight / LBS:12.818; rs min:3 mm; UNSPSC:31171547; Profile:Complete with Outer; Manufacturer Name:NTN; Da max:177 mm; Retainer:Yes; Category:Cylindrical Roller B;