HITACHI 9146953 EX160-5 SLEWING RING

Oil Speed Rating n2:15000 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:15100 N; D:42.0000 mm; Accessories:No Shield, no Seal,; Grease Speed Rating n1:11000 rpm; Sealed Speed Rating n3:11000 rpm; Basic Static Radial Load Rating Co:9300 N; B:19.1 mm; d:15.000 mm;

P120°:73.8 kN; Initial grease fill:382.73 g; Labyrinth ring (db shaft position):LOR 121; Lock washer:W 22; P90°:113 kN; PG:1/4 NPT; R2:36.513 mm; J min.:371.475 mm; RG:1/2 NPT; h:61.119 mm;

Grease Speed Rating n1:19000 rpm; D:35.0000 mm; Basic Dynamic Radial Load Rating C:8520 N; Basic Static Radial Load Rating Co:4650 N; Fillet Radius rb:0.10 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating n2:24000 rpm; d:17.000 mm; B:10.00 mm;

G:Tr 480x5; Mass adapter sleeve assembly:153 kg; A:6.5 mm; Lock nut:HM 3196; Locking device:MS 3196; G2:M 8; d3:620 mm; B1:397 mm; B5:95 mm; B:75 mm;

S:4.763 mm; Cap bolt:5/8-11 UNC; Mass pillow block:21.8 kg; Pa:13.8 kN; End plug (suffix Y):EPR 12; P60°:141 kN; R1:58.737 mm; P120°:52.5 kN; P180°:57.4 kN; Labyrinth ring:2 x LOR 101;

Calculation factor kr:0.15; Basic static load rating C0:200 kN; Fatigue load limit Pu:25 kN; F:100.5 mm; da max.:98 mm; B:28 mm; Da max.:139 mm; D:150 mm; ra max.:2 mm; r3,4 min.:2 mm;

Fatigue load limit Pu:0.8 kN; Mass bearing unit:0.86 kg; d:40 mm; Basic static load rating C0:19 kN; H2:19 mm; Recommended tightening torque for grub screw:6.5 N·m; Basic dynamic load rating C:30.7 kN; A:48 mm; H:99.5 mm; s1:30.2 mm;

Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:374000 N; Basic Static Radial Load Rating Co:550000 N; Grease Speed Rating n1:1600 rpm; D:390.0000 mm; B:55.00 mm; d:240.000 mm; Oil Speed Rating n2:1900 rpm;

Insert Bearing IB:Stainless Steel; Basic Static Radial Load Rating Co:4270 lbf; Dimension L:5.1250 in; Shaft Diameter D:1 1/2 in; Basic Dynamic Radial Load Rating:5550 lbf; Dimension A2:0.6563 in; Diameter N:0.5469 in; Height T:2.1250 in; Weight W:1.98 lb; Distance J:4.0000 in;

J7:40 mm; P150°:250 kN; H2:40 mm; P90°:370 kN; J:320 mm; Grub screws:7 x M 6; Calculation factor e:0.24; P180°:310 kN; P0°:470 kN; Pa:35 kN;

L:125 mm; Hexagonal key size for grub screw N:3.175 mm; H2:40 mm; A5:26.5 mm; Limiting speed with shaft tolerance h6:3800 r/min; Recommended tightening torque for grub screw:4 N·m; Fatigue load limit Pu:0.475 kN; G1:21 mm; H1:89 mm; B4:5 mm;

da max.:685 mm; d2 ≈:685 mm; D:870 mm; b:22.3 mm; d3:700 mm; Calculation factor Y0:2.8; r1,2 min.:6 mm; Calculation factor e:0.22; Ba min.:22 mm; Calculation factor Y2:4.6;

B:28 mm; Mass:0.63 kg; G:M 65x2; h:3.5 mm; d5:89 mm; Associated spanner (Hook spanner in accordance with DIN 1810):HN 14; d1:85 mm; Recommended tightening torque:8.4 N·m; Grub (set) / Locking screw size:M 5; d3:90 mm;

b1:5 mm; Specific static load factor K0:300 N/mm²; b:4.8 mm; Design (sliding contact surface combination):Steel/steel; r1 min.:1 mm; da min.:56.5 mm; da max.:62.5 mm; α:9 °; Da max.:75.9 mm; Material constant KM:330;

Reference speed:630 r/min; Eb:244 mm; Roller and cage thrust assembly:K 89330 M; Housing washer:GS 89330; Limiting speed:1300 r/min; Basic static load rating C0:3250 kN; Mass roller and cage thrust assembly:3.75 kg; Basic dynamic load rating C:670 kN; Shaft washer:WS 89330; Dw:19 mm;